Specifications

45/146
Preparing The Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
The VarioFlex mount consists of a central joint, which is directly screwed into place with
the weatherproof housing, and a wall and ceiling mount, which is fastened to the central
joint with just one screw. In addition to being easy to install, the VarioFlex mount enjoys
the advantage of completely concealed cabling and high impermeability to water and
dust (IP66). Wall and ceiling mounts are designed so that they can be mounted over
conventional flush-mounted sockets (without the frame) or cavity sockets and conceal
them completely.
Make sure that you have found the best camera position before mounting the camera. It
is important that the camera's field of view is not obstructed in any way. Once the camera
has been mounted to a wall or ceiling, you can fine-tune its position. If the monitored
area changes from time to time or the camera has to be installed in a dierent location,
the camera lens can be exchanged in just a few easy steps and used, without having to
upgrade to new video software (does not apply to the M24M-Sec with hemispheric L11 lens).
-90°
+20°
Mounting to a wall
360°
Mounting to a ceiling
Wall mount
Central joint
Weather protection
Ceiling mount
Space for RJ45 ush-mounted socket/concealed cabling
Mounting to a ceiling
• horizontally: 360°
• vertically: -90° to +20°
Mounting to a wall
• horizontally: 180°
• vertically: -90° to +20°
VarioFlex mount with
protected cabling
and cover for ush-
mounted sockets