Specifications

101/146
First Images And The Most Important Settings
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Reconguring Cameras In A Dierent Subnet
In most networks, a DHCP server will
automatically assign the IP addresses for
network devices so that you can apply
the default settings in the Congure
camera dialog (Get IP address auto-
matically). If you would like all cameras
to obtain IP addresses automatically,
select the Apply to all selected cam-
eras checkbox.
If the IP addresses for devices on the
network are permanently assigned,
ask your network administrator for
the appropriate IP addresses for the
cameras. Once you have that information, enter the correct IP address and subnet mask
for each camera in the Use the following IP address option.
Make sure that the Save conguration permanently on camera checkbox is selected so
that the cameras can be found at the designated IP address when you restart your computer.
Now wait until MxControlCenter has modified the network settings of the cameras and
restarted the computer. The status of the reconfigured cameras changes from (dif-
ferent subnet) to (OK). Confirm the Open Video Sources dialog again by clicking OK.
Dening Additional Video Sources
In addition to the MOBOTIX cameras that are found automatically, you can also manually
add video sources to the list of video sources for MxControlCenter.
• Camera: Here, you can enter the known IP address or
DNS name of an MOBOTIX camera or a third-party IP
camera if it was not found by the automatic search feature.
• MxPEG clip: Adds an MxPEG video clip previously recorded
by a MOBOTIX camera as a video source.
• Recording path: Adds the path of an external file server
where a MOBOTIX camera has recorded audio/video
data. The videos or images recorded at that location can
now be played back using the Player or Video Search.