Manual

99
Virtual PTZ and Full Image Recording
Wall-Mounted:SettingandCorrectingtheStandardView“Panorama”
1. In the DisplayMode Quick Control, select the Panorama option. Examine the image
that is now displayed. If the section meets your expectations, no further adjustment
isnecessary,andpanoramacongurationiscomplete.Tochangetheimagesection
tomeetyourspecicexpectations,continuewithstep2.
Note
Thecurrentlyvisibleimagesectionmaydierfromthedesiredimagesectiondue
to the installation position or any accessories in use, for example. However, it is not
necessary to physically move the camera, as in this case the browser alone can be used
to adjust the visible panorama image by zooming, panning and tilting. Tilted vertical
lines may also be optically straightened to the image edges using the panorama cor-
rection function. These tilted lines are primarily caused if the camera or sensor module
istilted(forexample,duetomountingwith15°wedges)oriftheimagetiltismodied.
Camera live image with
panorama correction
High-resolution180°panorama
Camera live image
withoutMOBOTIX pan-
orama correction with
Quick Controls visible