Manual

88
M16 Camera Manual: Operating The Camera
3.3 Adjusting Camera, Lens Focus and Installing Filters
3.3.1 Adjusting the Camera
1. The live image from the camera is displayed on the computer monitor.
2. Loosen the screws on the VarioFlex mount using
the supplied Allen wrench so that you can easily
turn and tilt the camera.
3. Display the desired camera section on the com-
puter monitor, then turn and tilt the camera until
you have found the best position and sharpness.
Retighten the screws of the VarioFlex mount to
prevent the position of the camera from changing.
4. If required, clean the lens using a clean, lint-free
cotton cloth.
CorrectingtheImageHorizon(ForB016Sensor
ModuleOnly)
The M16 with hemispheric B016 sensor module
allows the correction of an uneven image horizon via
OnScreen Control that was possibly caused by the
installation position. The image horizon is turned by
up to 30 degrees clockwise or counterclockwise and
can be optically restraightened by clicking the icons
(see image).
-30°
+30°
Section 3.4 provides more
details and information
on the functionality of
the OnScreen Control
Correcting the image
horizon:
Rotate image tothele
Rotate image to the right
+/- 30°