Manual

86
M16 Camera Manual: Operating The Camera
3.2.4 Start Options of the Camera
By default, the camera starts as DHCP client and automatically tries to get an IP address
fromaDHCPserver.Tostartthecamerainamodedierentfromthedefaultmode,youcan
activate the boot menu of the camera.
Preparing the Camera
• Disconnectthecamera’spowersupply.
• Make sure that you have suitable item such as a paper clip at hand, but never use
sharp or pointed objects!
• Reconnect the power supply of the camera.
ActivatingtheBootMenu
TheredLEDlightsup5to10secondsaerestablishingthepowersupplyandwillstayon
for10seconds.Brieypressthekeybyinsertingthepaperclipintotheholeindicatedby
theredcircleinthegure.Thecameraentersthebootmenu,readyforselectingoneof
the start options.
TheLEDnowashesonceandrepeatstheashsignalaerpausingforonesecond(the
numberofashesindicatesthecurrentstartoption).Togotothenextstartoption,briey
pressthekeyagain(<1sec).Aerthelaststartoption,thecamerareturnstotherstoption
(LEDashesonce).
Selecting a Start option
Pressthekeylonger(>2sec).Thecameraconrmstheselectionbyashingrapidlythree
times.Youcannowremovethepaperclip.Aer20sec,thecamerawillconrmtheselection
by playing a sound according to the table above.
Ifnothingisselected,thecamerawillresumeitsnormalbootprocessaeracertaintime.
1
2
L
LED default settings:
1 Power (on),
Error(ashes)
2
Recording(ashes)
LED
ashes
Start
Option
Meaning Audio
Conrmation*
1 x — This option is not used on this camera model. —
2 x
Factory
Defaults
Starts the camera with factory defaults (factory default IP
address, users and passwords will not be reset).
Boing
3 x
Automatic
IP Address
Starts the camera as DHCP client and tries to obtain an IP
address from a DHCP server. If a DHCP server cannot be found
or no IP address can be obtained, the camera starts with its
factory default address.
Boing Boing
4 x
Recovery
System
Starts the camera with the recovery system, e.g., in order to
recoverfromafailedupdateofthecamerasoware.
Alarm Sound
*Only on cameras with audio option and installed speaker.