Manual

84
M16 Camera Manual: Operating The Camera
ReconguringNetworkAddressesofCameras
UsingBonjour*,MxManagementCenterndsnotonlycamerasonthesamenetworkasyour
computer, but also MOBOTIX cameras located in other subnets (status: ). In such a case,
youwouldnotbeabletoestablishanyconnectiontocamerasinadierentnetworkorsubnet.
This is the case, for example, if you are integrating cameras into a network without DHCP
server(i.e.,withxedIPaddresses)andtheIPaddressrangeisdierentfromthe10.x.x.x
range supported by the cameras in addition to DHCP.
MxManagementCentercanautomaticallyconguresuchacamerasothatitis”integrated”
into your existing network. To do so, you have to select the respective camera and then click
on the
button at the bottom of the program window.
The Network Setting dialogue opens.
IfyouhaveassignedaxedIPaddresstoyourcomputer,youwillcertainlyprefertoassign
xedIPaddressestothecameras.Todoso,entertheIPaddressandthesubnetmask.The
IP address is incremented automatically for each selected camera.
WhenyouclickonApply,theselectedcamerasareautomaticallyreconguredandtheyare
located in the same subnet as the computer.