Manual

77
Manual and Automatic Operation – Overview
• Network with xed IP addresses
In order to access the camera, it must have an IP address within the range of the local
network.Tosetthecamera’snetworkparameters,youcanuseoneofthesemethods:
– Manually using a browser:
First, you need to change the network parameters of your computer (see Section 3.2.1,
«Manually Setting Up the Network Parameters in a Browser» and following …).
– IntegrationintoMxManagementCenterwithautomaticadjustmentofthecamera’s
IP address:
The camera is displayed in MxManagementCenter despite the fact that the IP address
isnotpartofthelocalnetwork.Theapplicationallowsreconguringthenetwork
parameters accordingly (see Section 3.2.3, «First Images and Network Parameter
CongurationinMxMC»).
3. Congure the camera.
Using the web-based user interface or MxManagementCenter.
Camerasoware
in the browser