Manual

Mounting the Camera with Ceiling Mount*

Mountthecamera: Place the ceiling mount over the

drill holes, use the four screws each with a washer and

tighten them using the appropriate screwdriver. Do

not overtighten the screws as this may damage the

plastic mount. Check that the screws are securely in

place and place the white caps on the screw heads.

Then aim the camera as described in Section 3.3.

7. Clean sensor modules: Clean the protective glass

and the dome of the sensor modules with a clean

socottonclothforoptimalimageresults.

Establish a connection to the camera, check the image: Establish a connection to the

camera as described in Section 3.1, «Manual and Automatic Operation – Overview»

and the following sections. The live image from the camera should be visible on the

computer monitor. Check image sections on the computer monitor.

Note

The

VarioFlex mount

and

wall mount

must always be used for

wall installation

(see

Section 2.3, «Mounting the Camera with Wall Mount»).

Screw caps for lock screws