Manual

60
M16 Camera Manual: Installation
2.4 MountingtheCamerawithCeilingMount*
The M16 is an allround camera designed for use in indoor and outdoor applications. The
camera is always installed together with the VarioFlex mount, which is shipped as a wall
mount, but can be converted to a ceiling mount in just a few steps. The best camera position
for the selected lens must be found before installing the camera on a ceiling, an overhang
or balcony (see Section 2.1.1, «Installation Options: Wall, Ceiling, Pole» and Section 2.1.2,
«InstallingtheCamerawithHemisphericSensorModules»).Youcanne-tuneitsposition
once the camera has been installed on the ceiling.
*Only included if this had been specied when ordering the camera!
2.4.1 VarioFlexCeilingMount
Using the VarioFlex ceiling mount, the camera can be precisely panned, both horizontally
and vertically, to suit the area that is to be monitored.
When installed on a ceiling, the camera can be turned or tilted as follows:
• horizontally: 360°
• vertically: 107°
Tilting the camera when
installed on a ceiling
• Horizontal: 360°
• Vertical: 107°
-90°
+17°
360°