Manual

57
Mounting the Camera with Wall Mount
Inordertoensureaushnishwiththesurface,connectthecamerapatchcabletothenet-
work cable using a standard adapter that is protected in the wall mount or a MX-Patch-Box
that can easily be inserted into the cavity socket of the wall mount (VarioFlex mount). For
more information on the MX-Patch-Box, please visit www.mobotix.com and go to the
Product Selector > Accessories > Interface Boxes section. It is also possible to install an
in-wallsocketwithRJ45connector. When doing so, make sure that the in-wall socket is
placed as high up in the wall mount housing as possible.
When installing
on-wall cabling, breaking out one
of the four possible openings in the base of the wall
mount with a pliers will ensure that the cables can
be fed neatly into the camera. The connection to the
camera patch cable can be established using a suitable
adapter within the wall mount.
Caution: If using the camera outdoors, only use
the opening at the bottom of the mount to prevent
water from entering the mount!
MX-Overvoltage-Protection-Box
the wall mount
Wall seal In-wall socket Wall mount
Camera patch cable
Pliers to break through
a cable guide