Manual

44
Table of Contents
2 Installation 36
2.1 Preparing the Installation 36
2.1.1 Installation Options: Wall, Ceiling, Pole 36
2.1.2 Installing the Camera with Hemispheric Sensor Modules 39
2.1.3 Network Connection and Power Supply, UPS 42
2.1.4 Providing the Camera Connections, MX-Overvoltage-Protection-Box 43
2.1.5 Wiring, Fire Prevention, Lightning and Surge Protection 44
2.2 First Installation Steps 45
2.2.1 Initial Installation of the Sensor Modules (Except M16 Complete Cameras) 45
2.2.2 Opening the Camera Housing 47
2.2.3 Installing the Security Clips (Optional, Not Required for M16 Complete Cameras) 48
2.2.4 Exchanging Sensor Modules 49
2.2.5 Replacing the Ethernet Patch Cable 50
2.2.6 Connecting a USB Cable 52
2.2.7 Connecting a Two-Wire MxBus* Cable 53
2.2.8 Closing the Camera Housing 54
2.3 MountingtheCamerawithWallMount 56
2.3.1 VarioFlex Wall Mount 56
2.4 MountingtheCamerawithCeilingMount* 60
2.4.1 VarioFlex Ceiling Mount 60
2.5 MountingtheCamerawithPoleMount(Accessories) 64
2.5.1 Pole Mount (MX-MH-SecureFlex-ESWS) 65
2.6 ReplacingtheMicroSDCard 69
2.7 Network and Power Connection 71
2.7.1 Network Cabling for M16 with Patch Cables 71
2.7.2 Power Supply Using a Switch 72
2.7.3 Power Supply When Connected Directly to a Computer 73
2.7.4 Power Supply with Power-Over-Ethernet Products 73
2.7.5 Variable PoE 74