Manual

38
M16 Camera Manual: Installation
Wall Installation
The M16 can be installed on the wall of a building or structures, even mobile surfaces, for
both indoor and outdoor use. The camera is mounted using the pre-installed VarioFlex
mount(suppliedasstandard), which is easily secured using the four enclosed screws and
screw anchors (depending on the surface, it can also be mounted without screw anchors
directly over the in-wall socket). The Ethernet connection cable of the camera has already
been guided through the mount and simply needs to be connected with the network cable
on-site (for example, using the MX-Patch-Box). By adjusting the VarioFlex mount as required,
the captured image area can be precisely adjusted to the desired practical application. The
cameracanbeturnedortilted180°horizontallyand80°vertically(from-60°to+20°).
Ceiling Installation
By exchanging the wall mount for the ceiling mount (delivered upon request), the M16 is
ready to be installed on ceilings in just a few easy steps thanks to the VarioFlex system.
Thisinstallationoptionisofparticularbenetwhenmonitoringrectangularroomswitha
single camera. In such cases, the B041 sensor module with Super Wide-Angle lens allows
the room to be monitored almost entirely by an M16 installed on the ceiling in one of the
corners.UsingthePTZsoware,youcaneasilyzoominonimagedetailsineitherthelive
image or the recording. Thecameracanbeturnedortilted360°horizontallyand107°
vertically(from-90°to+17°).
-60°
+20°
Wall installation
Wall installation
• Horizontal: 180°
• Vertical: -60° to +20°
360°
Ceiling installation