Manual

37
Preparing the Installation
The VarioFlex mount consists of a central joint, which is directly screwed into place with the
M16 housing, and a wall and ceiling mount, which is fastened to the central joint with just
one screw. In addition to being easy to install, the VarioFlex mount enjoys the advantage of
featuring completely concealed cabling and high impermeability to water and dust (IP66).
Wall and ceiling mounts are designed such that they can be installed over conventional in-
wall sockets (without the frame) or cavity sockets and conceal them completely. A MOBOTIX
interface box can be integrated in the wall mount.
Make sure that you have found the best camera position before installing the camera. It is
importantthatthecamera’seldofviewisnotobstructedinanyway.Oncethecamera
hasbeeninstalledonawallorceiling,youcanne-tuneitsposition.Ifthemonitoredarea
changesorthecamerahastobeinstalledinadierentlocation,itiseasytoexchangethe
camera’ssensormodulesandcontinueusingthecamera,withouthavingtoupgradeto
newvideosoware.
360°
Ceiling instal-
lation
Weather
protection
Ceiling mount
-60°
+20°
Wall installation
Wall mount
Central joint
Tilting the camera when
installed on a wall
• Horizontal: 180°
• Vertical: -60° to +20°
Tilting the camera when
installed on a ceiling
• Horizontal: 360°
• Vertical: -90° to +17°
Space for RJ45 in-wall socket/concealed cabling
VarioFlex wall mount with
protected cabling and cover
for in-wall sockets and
MOBOTIX interface boxes