Manual

30
M16 Camera Manual: Product Overview
1.5.11 ExtIOExpansionModule
Order no.: MX-ExtIO
The device, which is suitable both for on-wall and cavity-
wall installations, contains a powerful speaker, microphone,
infrared motion sensor, ambient temperature sensor, two
input and two output contacts and two illuminated keys. It
is ideal for door communication, elevators, access control
systems, etc. The ExtIO is suitable for use as direct con-
nection to the M16 via a MiniUSB cable (max. 5 m), which
can be ordered separately, or as a network connection via
the PoE switch.
1.5.12 Mx2wire+MediaConverter
Order no.: MX-2WirePlus-Set-PW
The Mx2wire+ system allows an Ethernet network with PoE
to be set up via two-wire cables, which saves users from
having to lay several hundred meters of Ethernet cable. For
example, an existing two-wire cable of an analog video cam-
era can be reused to connect a high-resolution and modern
IP network camera. Mx2wire+ is delivered in the standard
walloutletframeindierentdesigns;however,itcanalso
be used with the available on-wall socket that is included.
1.5.13 Security Screw Set with Allen Bit
Order no.: MX-OPT-SEC-SCREWS-SET
Use this triple set of security screws for plugs (4 pcs 6x50) and
for machine threads (4 pcs M6x15, 4 pcs M6x30) to securely
attach the VarioFlex foot of the wall mount. The Allen bit
supplied with the set (1/4 in drive with hole for security pin)
tsregularpowerscrewdrivers.
1.5.14 SealingRingasDomeReplacementforSensorModulesB016
Order no.: MX-OPT-Ring-L10-L12-PW/BL
For special scenarios with hemispheric sensor modules, e.g.,
iflightenteringfromthesidecreatesreectionswithinthe
dome, you can use the sealing ring instead of the dome (see
also Section 3.3.4, «Replacing the Dome Against the Sealing
Ring (B016 Only)»). In order to avoid burns by the hot lens,
the dome must not be removed if the sensor module is within the reach of persons!