Manual

27
Available Accessories
1.5 Available Accessories
1.5.1 PolarizationFilter
Order no: MX-SM-OPT-POL
Thepolarizationltercansuppressannoyingreections
and thus enhances recognizability of persons behind wind-
shields,forexample.Thislterreplacestheprotectiveglass
insert into the corresponding sensor module (note that
thislter cannot be used in B016 sensor modules). Use
thebluelenswrench(M.6)torotatethepolarizationlter
and to adjust its orientation (see Section 3.3.3, «Inserting
aFilter»).Duetoitsnature,thislterreducestheamount
of light that enters the lens by approximately 50 %. The
redsealingringdistinguishesthislterfromotherltersandtheprotectivelensinsert.
1.5.2 MiniUSBCabletoMiniUSB(Angled/Straight)
Order no.: MX-CBL-MU-EN-STR-05/2/5
(angled/straight)
The MOBOTIX MX-232-IO-Box can be connected directly
totheM16withthiscable,whichisuptovemeterslong.
1.5.3 MiniUSBCabletoMiniUSB(Angled/Angled)
Order no.: MX-CBL-MU-EN-EN-PG-05/2/5
(angled/angled)
The MOBOTIX ExtIO can be connected directly to the M16
withthiscable,whichisuptovemeterslong.
1.5.4 MiniUSBCabletoUSB-ASocket
Order no.: MX-CBL-MU-EN-AB-05/2/5
USB-based storage media (for example, USB hard drives)
can be connected directly to the M16 with this cable, which
isuptovemeterslong.
Only cables with
angled plugs can be
used for the M16