Manual

115
CongurationintheBrowser
alarm in the camera live image, sending an e-mail or IP Notify with the alarm image,
placing a phone call, uploading an alarm image to an FTP server, switching a signal
output line of the camera (for example, for switching on the lights/opening a door).
For the settings, see SetupMenu>ActionGroupOverview. The actions to be performed
aredenedandusedintheseactiongroupsintheformof“actionproles.”Thedierent
actionprolescanalsobedenedinthefollowingareas:AdminMenuintheHardware
Conguration(prolesforsignaloutput),TransferProles(FTP,e-mail,IPNotify)and
SoundandVoIPTelephony(soundproles,VoIPproles).Formoreinformation,refer
to the online help for the Action Group Overview dialog box.
• Activate shock detector: The M16 is also equipped with a shock detector as standard.
If,forexample,thecamera’shousingreceivesablow,itautomaticallyregistersitand
sendsanoticationviaanIP Notifyortelephonecall.Ageneraladvantageisthat
MOBOTIX cameras are extremely tough, not least because of the absence of mechani-
cal moving parts. This typically allows them to stay fully operational, in particular,
when they are subject to strong vibrations. Open the
SetupMenu>EventControl>
Environment Events > Edit dialog box if you would like to activate the shock detector
(and any other sensors).
3.6.3 ConguringtheM16-Thermal(-TR)intheBrowser
ModifyingtheDisplayOptionsoftheThermalImageSensor
By factory default, the color palette for displaying the thermal image sensor has been set
to
Grayscale and the palette is shown at the bottom of the image. In order to change the
display of the thermal sensor, open the
Setup Menu > Thermal Sensor Settings dialog
inthebrowser,selectadierentpaletteintheColor Palette dropdown and click on Set.
Use the Show Color Palette option to control whether or not the palette is shown at the
bottom of the image. See the
Thermal Sensor Settings help page for further information
on the available options.
EventsUsedbyThermalImageSensors(Non-TR)
Only the Video Motion and MxActivitySensor events are available for the thermal image
sensor.TheseeventscanbeconguredintheSetup Menu > Event Overview dialog in the
Image Analysis Events and Environment Events
section.Startingwithsowarerelease
V4.3.4.66, this includes the ability to measure temperatures using the Thermal Spotmeter
in the image center (four pixels) and trigger events if the temperature exceeds or drops below
thespeciedvalue.Bydesignitisnotpossibletorecognizeilluminationeventsonthethermal
sensor.Forthesamereason,therearen’tanyexposuresettingsforthistypeofimagesensor.
ExtendedFeaturesforCameraswithThermalRadiometry(-TR)
Thermal sensors with TR technology ( TR = Thermal Radiometry ) can measure temperature
values in the entire image area and can trigger events. For this purpose, the environment
events now include the Thermal Radiometry event type, which can be used to trigger
alarmsifspecictemperaturechangesintheimagearedetected.