Datasheet

92/148
T24 System Manual Part 1: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.4.5 Labeling The Info Modules
The info module allows you to place a paper label or printer label behind the transparent
cover. You can use the enclosed permanent marker to personalize the paper insert by
adding your name, contact number, house number and so on.
You will find a PDF template on the MOBOTIX website to help you create your own label.
Simply add your personal data to the template and print it onto a sheet of A4 paper.
Then simply cut out your ‘doorbell label’ and insert it into the info module. Before you do
this, you will need to remove the info module from the door station frame (see Section
2.4.6 that follows).
Note
To create a doorbell label that goes with a keypad, please make sure to familiarize
yourself beforehand with how to configure and operate the door station (see
Part 2 of the System Manual).
Proceed as follows:
1. Make your personalized doorbell label. To do this,
customize the PDF template (Info_Panel.pdf) provided
on the MOBOTIX website (www.mobotix.com).
2. Loosen the transparent protective cover on the info
module by hand or using a screwdriver, which you
position on the side (as shown in red) and use as a
lever.
3.
Tilt the protective cover downwards and remove the
silicone mat and paper insert.