Datasheet

91/148
Installing The T24 Modules
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
5. Remove the blue sealing plug on the module. Feed the RJ45 connector of the
(extended) camera patch cable into the housing and insert it into the RJ45 port.
Make sure that the rubber sealing ring on the patch
cable is in the correct final position.
6. Put the cover plate back on.
7.
First of all, insert the right side of the module into
the frame. Then press firmly on the left side, until
the module audibly clicks into place.
Control click: If you do not hear a click, this means that
the module is not properly mounted. In this case, repeat
the last steps, making sure that no cable or foreign object
in the housing is preventing the module from properly
clicking into place.
Click
a<-*42 )"3'+ +5$
)";3<$ 2" +5*+ +5$ /*#
-&+5 +5$ !MNM8KO
<$++$#&'@ &2 *+ +5$ +">