Datasheet

113/148
Installing The Indoor Unit T24-Info2wire+
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.6.5 Function Of Mx2wire+ Status LEDs
Each Mx2wire+ unit has two status LEDs (green and orange), which provide information
on the current state of the PoE power supply and on the transfer of data. The LEDs can
either light up continuously (ON) or they can blink (BLINK).
Green LED Orange LED Green LED Orange LED
ON ON ON ON
Power is supplied
to the
outdoor station
Network connection
to the outdoor station
has been established
Power is supplied to
the indoor unit
Network connection
to the switch has
been established
BLINK BLINK BLINK BLINK
never Data is transferred to
the outdoor station
Outdoor station is
receiving power
(is connected)
Data is transferred
from the indoor unit
Note
The two status LEDs (orange, green) in the outdoor station's T24-Info2wire+ info
module are only active for test purposes for the first 15 minutes after the power supply has
been established. After the LEDs have gone out, they can be reactivated by interrupting
the power supply for a short time.
T24-Info2wire+
indoor unit
Two-wire cable
Data and power
T24 Info2wire+