User manual

6) Guide the MOBOTIX M12 USB cable with the
angled Mini USB plug first from below through
the turn/tilt unit of the camera.
7) Insert the D Sub 15 HD plug of the MOBOTIX
M12 USB cable into the D Sub 15 HD connector
of the MOBOTIX camera.
8) Reinstall the bottom cover of the mount. In
the process, make sure that the camera's in-
sect protection remains firmly in place.
9) Guide the MOBOTIX M12 USB cable with the
angled Mini USB plug first from below through
the wall mount.
10) Insert the cover into the free opening of the
wall mount's foot.
11) Insert the turn/tilt unit of the camera into the
vertical opening of the mount (all the way to
the stop).
12) Insert the hex nut into the corresponding hole
and fasten the Allen screw with washer.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
39/76
MOBOTIX ExtIO User Manual
Insert the cover
Maximum torque for all
screws is 1 to 1.2Nm
(0.74lbf ft)
Insert the cover
Guide USB cable
through here
Attach bottom cover
Guide USB cable
through here
Connect D Sub
15 HD plug
Insert turn/tilt unit