User manual

2.5 Connecting a MOBOTIX USB Cable to the Camera
2.5.1 Overview
When using USB, you need to install the model-specific USB cable in the camera
and then guide it through the camera, the SecureFlex mount or the mounting op-
tion. Follow the steps that are required for your camera model:
D22M
1) Disassemble the D22M camera housing.
2) Remove the rubber plug.
3) Guide the USB cable into the interior of the D22M.
4) Connect the cable's Mini USB connector to the D22M.
5) Close off the opening for the USB cable at the back of the housing with the
rubber plug.
6) Reassemble the camera housing.
For additional information on this topic, see section 2.5.2.
M22M
1) Disassemble the SecureFlex mount.
2) Guide the USB cable for the M22M through the SecureFlex mount.
3) Remove the rubber plug of the USB connector.
4) Connect the USB connector of the cable to the M22M.
5) Properly attach the USB rubber plug to the USB connector.
6) Reassemble the SecureFlex mount.
For additional information on this topic, see section 2.5.3.
M12
1) Disassemble the SecureFlex mount.
2) Guide the USB cable for M12/D12 into the interior of the camera/wall mount.
3) Plug the D Sub 15 HD connector of the USB cable into the camera.
4) Reassemble the SecureFlex mount.
For additional information on this topic, see section 2.5.4.
D12
1) Disassemble the D12 camera housing.
2) Guide the USB cable for the M12/D12 into the interior of the camera mount.
3) Plug the D Sub 15 HD connector of the USB cable into the camera.
4) Reassemble the camera housing.
For additional information on this topic, see section 2.5.5.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
34/76
MOBOTIX ExtIO User Manual
When using the ExtIO
via USB, you also need
to order a model-spe-
cific MOBOTIX USB
cable
D22M USB cables:
MX-EXTIO-D22-1
(1 m/3 ft)
MX-EXTIO-D22-5
(5 m/16 ft)
M22M USB cable:
MX-CBL-U-MU-5
(5 m/16 ft)
M12-/D12 USB cable:
MX-CBL-HD-MU-5
(5 m/16 ft)
M12-/D12 USB cable:
MX-CBL-HD-MU-5
(5 m/16 ft)