Technical data

108/148
S14 Camera Manual: Operating The Camera
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
Cameras Are Found But Are Located In A Dierent Subnet
The symbols in the first column and the legend in the dialog box indicate whether you
can access a particular camera directly from the MxControlCenter, which is the case for
all cameras designated with
(OK) . Cameras designated with (dierent subnet)
are located in a dierent subnet. This usually applies to new cameras or cameras that
have been reset to their factory settings.
Note
MxControlCenter finds all MOBOTIX cameras, even when the computer and the
cameras are not located in the same subnet.
Once you have marked all of the desired video sources in the list with OK, you can now
select the ones that you wish to display and manage in MxControlCenter. The live image
is automatically displayed in the preview window when a camera is selected to help you
identify the cameras.
For cameras marked with Dierent subnet or if you want to add additional video sources,
follow the instructions in the following sections. You can also display the selected cameras
directly in a layout. For more information, see
«Creating A New Layout» further down.
Reconfiguring Cameras In A Dierent Subnet
If one or more MOBOTIX cameras are displayed with the status Dierent subnet (for
example, cameras with a factory IP address), MxControlCenter automatically oers to
configure the network settings of these cameras. In this case, the application displays the
dialog box shown here after you have clicked on the Add selected video sources button.
Click on Yes to configure the cameras to the subnet of the computer.
A DHCP server automatically assigns IP addresses for network devices in most networks
so that you can automatically select the default setting Get IP address automatically
(DHCP) in the Configure Selected Cameras dialog box.