Datasheet

www.mobotix.com
23
The HiRes Video Company
Low Cost, Low Energy Requirements
The automatic installation enables the user to set up the system quickly and easily
without the need for extensive network knowledge. The Door Station consumes very
little power (around five watt-hours), which is provided directly via the Ethernet cable.
It’s That Simple:
Simply connect all devices in accordance with the connection diagram supplied in the
system manual and briefly disconnect the Door Station from the power supply (e.g. pull
out the plug). Press the doorbell button as soon as the light and bell buttons on the
camera module to light up. The auto
configuration begins and the system
configures itself in the network. Now,
simply enter a security PIN and any
number of RFID cards (for keyless
access) by holding them up
to the Keypad. Done!
Step-By-Step Instructions
As standard with MOBOTIX, detailed,
colorfully illustrated and clear
instructions are supplied with the
hemispheric IP Video Door Station
for installation, start-up and operation
(www.mobotix.com > Support).
number of RFID cards (for keyless
access) by holding them up
to the Keypad. Done!