3 mm Beschnitt umlaufend Megapixel 1280 x 960 software zoom VGA (640 x 480) 10 fps Mega -22°F to +140°F Weatherproof -30°C to +60°C, IP65 no heating necessary M22M X Camera Manual Part 1 IEEE 802.
M22M Camera Manual Part 1 MOBOTIX Camera Data Enter the data of your camera here! Camera Model: Camera Name: Factory IP Address: . . . Current IP Address: . . . activated DHCP: deactivated Admin User Name: Admin Password: Notes: Technical information subject to change without notice! No part of this manual may be reproduced by any means without our written approval! Copyright © MOBOTIX AG, Kaiserslautern, Germany.
1/56 M22M Camera Manual Part 1 M22M CAMERA MANUAL PART 1 1 INTRODUCTION 6 1.1 The Concept of MOBOTIX M22M 7 1.2 Product Advantages of MOBOTIX M22M 10 1.3 Feature List 11 1.4 1.4.1 1.4.2 1.4.3 1.4.4 1.4.5 1.4.6 1.4.7 1.4.8 1.4.9 1.4.10 1.4.11 1.4.
2/56 M22M Camera Manual Part 1 3 OPERATING THE CAMERA 32 3.1 General Remarks on Operating the Camera 3.1.1 Establishing the Power Supply of the Camera 3.1.2 Connecting the Camera 32 32 32 3.2 Overview of the Configuration Settings 34 3.3 3.3.1 3.3.2 3.3.3 Connecting the Camera Power Supply Using MOBOTIX Products (Network Power Adapter) Power Supply Using PoE Products (Power over Ethernet) Camera Startup Sequence 36 36 37 37 3.4 3.4.1 3.4.2 3.4.3 3.4.4 3.4.
M22M Camera Manual Part 1 SOFTWARE CAMERA MANUAL PART 2 Note All chapters listed in the following (4 and higher) are part of the Camera Software Manual (Software Manual in short). The main headings are listed below to give you an overview of the Software Manual contents. 4 CAMERA USER INTERFACE 4.1 The First Image in the Browser 4.2 The First Image in MxViewer 4.3 The Live Screen in the Browser 4.4 The Playback Screen in the Browser 4.5 The MultiView Screen in the Browser 4.
4/56 M22M Camera Manual Part 1 6 SOFTWARE UPDATES 6.1 Overview 6.2 Preparatory Tasks 6.3 Updating the Camera Software 6.4 Update Checklist 7 EVENTS, ACTIONS AND MESSAGES 7.1 Overview 7.2 Functional Overview 7.3 Some Remarks on the Procedure 7.4 Screen Display of Event Settings in Live Image 7.5 Arming 7.6 Events 7.7 Actions and Messaging, Action and Messaging Profiles 7.8 Working with Profiles 8 RECORDING 8.1 Overview 8.2 Recording Modes 8.
M22M Camera Manual Part 1 10.3 Configuring Routers and Firewalls 10.4 Configuring DynDNS 10.5 Updating Web Pages 11 SOFTWARE INTERFACES 11.1 Overview 11.2 Accessing Live Images 11.3 Accessing the Second Image Channel 11.4 Video Streaming 11.5 The HTTP API 12 TROUBLESHOOTING 12.1 Overview 12.2 Troubleshooting Checklist 12.3 Diagnostic Tools of the Camera 12.4 Monitoring Tools of the Camera 12.5 Potential Other Problems 12.6 Additional Information 12.7 Sending Back the Camera 12.
6/56 M22M Camera Manual Part 1 1 30 frames per second! INTRODUCTION The M22M camera range represents the second generation of MOBOTIX network cameras. Now more powerful than ever, the new compact models are capable of creating high-resolution live video streams with high image rates. When showing VGA video (640x480), the camera can deliver up to 30 fps (frames per second). Even Megapixel video (1280x960) will still generate up to 10 fps.
M22M Camera Manual Part 1 1.1 7/56 The Concept of MOBOTIX M22M High-Resolution Live Video (640x480) with up to 30 Frames/s The second camera generation from MOBOTIX now delivers smooth live video display in VGA format with realtime audio channel, yet it keeps the network load to a minimum (approx. 2 Mbps). Live video display thus matches the performance of analog video systems.
8/56 M22M Camera Manual Part 1 Wireless and UMTS/3G Using CF Card (Optional) When using one of the MOBOTIX-installed Wireless or UMTS/3G CF cards for the second CF slot of the M22M, operating the system at hard-to-reach locations becomes easier and a lot more cost-efficient. 30 Live Cameras Using MxViewer Download MxViewer free of charge from www.mobotix.
M22M Camera Manual Part 1 9/56 Power over Ethernet Integrated Power is supplied via the network cabling using either devices that supply PoE according to IEEE 802.3af, the MOBOTIX Network Power Adapter or the Network Power Racks (up to 20 cameras). Since the camera's plastic housing insulates well and does not fog up, no additional heating or fans are necessary.
10/56 M22M Camera Manual Part 1 1.2 Product Advantages of the MOBOTIX M22M Product Advantages • • • • • • • • • • • • • • • • • • • • • • • • • MOBOTIX M22M camera models support the Power-over-Ethernet standard IEEE 802.3af as well as the MOBOTIX power supply technology. USB connector for MOBOTIX expansion modules. Individual lens configuration possible. Version CS with standard CS thread allows using CS mount and C mount lenses (C mount with adapter ring).
M22M Camera Manual Part 1 1.3 11/56 Feature List In its factory state, the MOBOTIX camera has the following main features (some features are model-dependent): • • • • • • • • • • • • • • • • • • Live images of up to 1280 x 960 pixels resolution via network, GSM, GPRS, UMTS, wireless up to 30 fps (at 640 x 480 resolution), also adapted for PDAs.
12/56 M22M Camera Manual Part 1 • • • • • MxPEG video compression using the free MxViewer for Windows. The ActiveX plug-in for Internet Explorer users brings all advantages of MxPEG (including the camera's audio stream) to the browser-based user interface. Routing allows using other network connections besides the standard route. DynDNS client for accessing the camera using a symbolic name (e.g. mymobotixcam.dyndns.
M22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
14/56 M22M Camera Manual Part 1 1.4 Important Notes 1.4.1 MOBOTIX M22M—Weatherproof with IP65 MOBOTIX M22M is IP65 weatherproof (absolutely dustproof, resistant against water jets) when used with the MOBOTIX M14 lenses and mounted lens cover. CAUTION: Only use the supplied connection cables and make sure that the supplied rubber plugs have been fitted to seal off both connectors. Note that the camera must never be installed without properly installed connection cables and rubber plugs! 1.4.
M22M Camera Manual Part 1 15/56 1.4.5 Resetting the Camera to Factory Defaults All settings of the MOBOTIX camera can be reset permanently to the factory default settings. This makes sense if you have, for example, obtained a camera without any information or you would like to reset all settings after testing the camera. In order to perform this procedure, you need to have access to the administration area of the camera (Admin rights). Open Admin Menu > Reset … to reset the camera to factory defaults.
16/56 M22M Camera Manual Part 1 1.4.9 Browser Hints Current browsers with activated JavaScript (Internet Explorer, Netscape, Mozilla, Firefox, Safari, Konqueror, Opera, …) can show the camera's live images with their standard settings. Text-based browsers (e.g. lynx) cannot display the user interface and are not suitable for operating the camera. Section 4.8, Browser Settings, in the Software Manual, contains more information on browser problems.
M22M Camera Manual Part 1 17/56 1.4.12 Additional Information For more information on this topic, see the News and Functional Overview pages in the online help of the camera's browser interface. Click on the yellow icon in the top right corner to open the camera's online help. Camera Help In order to get more information on the camera and its current configuration, open the Camera Status dialog by clicking on the yellow icon in the top right corner of the camera's browser interface.
18/56 M22M Camera Manual Part 1 2 MOUNTING THE CAMERA 2.1 Quick Start Mounting the MOBOTIX M22M generally follows these steps: • • • Checking the Delivered Parts (section 2.2) Selecting the Power Supply (section 2.4) Mounting the MOBOTIX M22M to a Wall or Ceiling (section 2.7) 2.
19/56 M22M Camera Manual Part 1 2.3 Camera Housing and Connectors of the MOBOTIX M22M The MOBOTIX M22M consists of two main components, the camera itself and the SecureFlex wall mount. Like the M10 models, the MOBOTIX M22M also features an integrated microphone and a speaker. 2.3.
20/56 M22M Camera Manual Part 1 2.4 Power Supply of the MOBOTIX M22M The M22M supports the Power-over-Ethernet standard IEEE 802.3af In order to reduce the amount of cabling, you should always use the Ethernet cable (Power over Ethernet) to supply power to the camera.
M22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
22/56 M22M Camera Manual Part 1 2.
M22M Camera Manual Part 1 23/56 2.6 Dimensions of the MOBOTIX M22M The SecureFlex mount enables easy mounting of the MOBOTIX M22M models to a wall or ceiling; the concealed cabling enhances the visual impression of the installation. The foot of the supplied wall mount is large enough to elegantly cover wall outlets (see section 2.7.4, Mounting the Camera over Wall Outlets).
24/56 M22M Camera Manual Part 1 2.7 Mounting the MOBOTIX M22M to a Wall or Ceiling The mount covers RJ45 wall outlets and conceals the cabling The wall mount is large enough to mount the camera over a wall outlet (see section 2.7.4, Mounting the Camera over Wall Outlets). In order to increase the tilt of the camera, turn the vertical tilt joint by 180 degrees or shorten it.
25/56 M22M Camera Manual Part 1 When mounted to a ceiling, the camera can be turned/tilted as follows: • • horizontally: approx. 360° vertically: approx 90° 2.7.3 Converting the Wall Mount to Ceiling Mount If the camera is to be mounted to a ceiling, it is necessary to convert the SecureFlex wall mount.
26/56 M22M Camera Manual Part 1 • Place the hex nut into the corresponding hole, insert the Allen screw with washer and lightly fasten the screw so that you can still easily move the camera. Converting the ceiling mount back to wall mount follows the steps in reverse order. 2.7.4 Mounting the Camera over Wall Outlets Mounting the SecureFlex mount to a wall allows covering RJ45 wall outlets (without frame) and also allows using a defined network end point.
M22M Camera Manual Part 1 27/56 When installing an above-the-wall assembly, breaking out one of the four openings in the base of the mount will provide for properly guiding the cable into the mount. MOBOTIX offers five different lenses from Super Wide Angle (L22) to Tele (L135). Since the M22M is backlight-proof, these lenses do not require an auto iris. Without the iris as a mechanical component, these glass lenses are extremely robust and maintenancefree.
28/56 M22M Camera Manual Part 1 2.7.6 CS Mount Version M22M-SecureCS with L24-54 Vario CS The M22M-SecureCS is delivered with a CS mount and a compact L24-L54 1/2" vario lens. To protect the lens against the weather, this version comes with a longer lens cover (43 mm inside, 53 mm outside) with integrated glass pane and threads for an external filter (40.5 mm x 0.5 mm). This cover will work for lenses, which have a maximum diameter of 36 mm and which are not longer than 43 mm.
M22M Camera Manual Part 1 29/56 2.7.8 Changing Lenses As described in section 2.7.5, M14 Fixed Lenses, the M22M can be fitted with several MOBOTIX lenses. Proceed as follows to change a lens: • • • • • • • • Unmount the lens cover by turning it counter-clockwise. Loosen the lens' lock ring (if fitted) by turning it counter-clockwise. Remove the lens with the lock ring by turning it counter-clockwise. Unscrew the lock ring (if present) from the lens you just removed and screw it onto the new lens.
30/56 M22M Camera Manual Part 1 2.8 Wiring, Fire Prevention, Lightning and Surge Protection When installing the wiring inside or outside of buildings, make sure you always adhere to the relevant regulations on wiring, fire prevention and protection against lightning.
M22M Camera Manual Part 1 • Surge protection: Make sure you have installed proper protection against electrical surges in order to prevent damage to the camera, the building and the network infrastructure. This includes surge protectors for 19" racks, adding an uninterruptible power supply (UPS) to the MOBOTIX camera and installing surge arresters or similar for routers, switches, servers, etc. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
32/56 M22M Camera Manual Part 1 3 OPERATING THE CAMERA 3.1 General Remarks on Operating the Camera The MOBOTIX camera does not require any software installation; all you need is your preferred browser with JavaScript support to operate the camera. Thus, the MOBOTIX camera is supported by all common operating systems (such as Windows, Macintosh and Linux, ...). 3.1.1 Establishing the Power Supply of the Camera You can choose between the following options: PoE: see section 3.
M22M Camera Manual Part 1 33/56 Note After first booting the new MOBOTIX camera or after resetting to factory defaults, accessing the Administration menu in the browser (Admin Menu button) will automatically start the Quick Installation wizard. This is where you configure the most important camera parameters in a step-by-step manner. If you have completed the Quick Installation wizard at least once, the standard Administration menu will open.
34/56 M22M Camera Manual Part 1 3.2 Overview of the Configuration Settings Always use Quick Installation for initial configuration • Quickly installed using the Quick Installation wizard After first booting the camera or after resetting it to factory defaults, any access to the administration menu (Admin Menu button) will start the Quick Installation. Admin Menu This wizard will guide you through the most important settings of the camera (configuration of the network interface, image control, etc.
M22M Camera Manual Part 1 Once you have finished configuring the camera, you should always store the settings in the camera's permanent memory. You can do so in each dialog (clicking on Set at the bottom of each dialog will temporarily set the changes; clicking on Close will ask you to store the complete configuration in the camera's permanent memory) or in the Configuration section of the administration menu (Admin Menu > Store current configuration into flash memory).
36/56 M22M Camera Manual Part 1 3.3 Connecting the Camera Make sure that you only use switches or routers that support the 10/100 Mbps Ethernet interface of the camera and check the LED activity of the corresponding port of the switch or router. For additional information on this topic, see section 4.11, Operating Many Cameras, in the Software Manual. 3.3.
M22M Camera Manual Part 1 37/56 3.3.2 Power Supply Using PoE Products (Power over Ethernet) • Connect the NET connector of the camera to the Ethernet connector of the switch/router. The network components need to support the PoE standard IEEE 802.3af. PoE IEEE 802.3af! The network components (switches/routers) need to support the PoE standard IEEE 802.3af! Note If you are using Power over Ethernet components (IEEE 802.
38/56 M22M Camera Manual Part 1 3.4 The First Image of the Camera Once the Ethernet connection has been established (see section 3.4.1, Preparing the Ethernet Connection), you have the following possibilities to see the first image of the camera: • • Direct access using a browser (section 3.4.2, The First Image in the Browser) Display the camera using MxViewer (free Windows client for MOBOTIX cameras; section 3.4.
M22M Camera Manual Part 1 39/56 Make sure that no other network device uses the camera's IP address: • Open a command shell (Windows) or a console (Linux) and enter the following command: ping If you receive an answer from another network device although the camera is not connected, you will have to remove that device until you have reset the MOBOTIX camera to a free IP address. We recommend using the Quick Installation wizard for this task.
40/56 M22M Camera Manual Part 1 3.4.2 The First Image in the Browser Camera access: http://10.1.0.99 (example IP) The factory IP address is printed on the sticker on the camera housing As you have successfully started the camera for the first time, you can now access the camera using your preferred browser to see the live video stream and the user interface. Internet Explorer, Mozilla, Firefox, Safari or any other graphical browser with activated JavaScript is suitable.
M22M Camera Manual Part 1 41/56 Notes Factory Defaults: Every MOBOTIX camera has its individual factory IP address (e.g. 10.1.0.99). You will find this address on a small sticker on the camera housing. If you have started the camera using DHCP or you have set the IP address manually, use the new IP address (e.g. 192.168.0.99) instead of the factory IP address. Pressing the “R” key on the back of the camera will prompt the camera to announce its current IP address.
42/56 M22M Camera Manual Part 1 3.4.4 Camera Screens in the Browser By factory default, the MOBOTIX camera first shows the Live screen. You can set a different entry page in order to prevent others from changing settings; you can assign user names and passwords to prevent unauthorized access or you can restrict access to the current live image only, by setting the Guest screen as entry page.
M22M Camera Manual Part 1 43/56 3.4.5 The First Image in MxViewer MxViewer is a free Windows application that allows displaying multiple MOBOTIX cameras on one computer and provides alarm management functions. It can easily handle displaying 30 cameras with CIF resolution at 30 fps each in MxPEG format on one standard PC with Intel Pentium 4 and 3 GHz. Download MxViewer free of charge from www.mobotix.
44/56 M22M Camera Manual Part 1 Installing and Starting MxViewer Follow these steps to install MxViewer: Download MxViewer free of charge from www.mobotix.com • • • • • Download the newest version of MxViewer as a ZIP file: http://www.mobotix.com/Download/mxpeg.php. Create a new folder in the Windows program files folder, e.g.: C:\Program Files\MOBOTIX\MxViewer. Copy the contents of the ZIP file into the folder you just created. Create a shortcut by right-clicking on MxViewer.
M22M Camera Manual Part 1 Automatically Searching MOBOTIX Cameras in the Same Subnet MxViewer displays the Scan network for MOBOTIX cameras dialog: • • Click on the Subnet dropdown list and select the desired subnet. Click on Scan to start the camera search. If MxViewer finds only one subnet, the scanning process will start automatically. In the first pass, MxViewer searches the selected subnet for MOBOTIX cameras and in the second pass, MxViewer verifies if it can access the cameras.
46/56 M22M Camera Manual Part 1 Automatically Searching MOBOTIX Cameras in all Subnets Enhanced search features Future versions of MxViewer will be able to search MOBOTIX cameras not only in the current subnet of the computer, but also in all subnets, which can be reached within the same physical network (e.g. not closed off by routers or other mechanisms). This means that MxViewer can find cameras with factory IP address (e.g. 10.1.0.
M22M Camera Manual Part 1 Further Information on MxViewer For further information on MxViewer, download the MxViewer User Manual from www.mobotix.com: • • Saving and loading MxPEG video clips Creating and editing layouts using the Layout Editor Note Use MxViewer's Layout Editor to design the layout of the camera display on the screen (number of cameras, arrangement, size). The editor supports drag&drop, MxPEG clips, and allows using building or property plans and similar graphics as a background image.
48/56 M22M Camera Manual Part 1 3.5 Starting the Camera With an Automatic IP Address (DHCP) If your network has a DHCP server, you can start the camera with DHCP support. In this case, the DHCP server automatically assigns an IP address. Activate the camera speaker! As soon as startup has been completed, the camera automatically announces its IP address, its network mask and its MAC address (except Web and Basic models; speaker has to be activated).
49/56 M22M Camera Manual Part 1 3.6 Starting the Camera Using the Factory IP Address Under certain circumstances, you may have to reset the camera to its factory IP address. This could be the case if the IP address of the camera has been lost or the camera does not react to the last known IP address.
50/56 M22M Camera Manual Part 1 3.7 Drilling Template M22M (Scale 1:1) Find the drilling template at the end of the manual as a fold-out Wall outlet at upper rim Note Make sure that the drilling template is not scaled (up or down) when printing the template. When printing the PDF, make sure that you print two facing PDF pages on one single A4 page in order to obtain a scale 1:1 template. © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
M22M Camera Manual Part 1 Notes: © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
M22M Hardware Features IP65 IP65 IP65 IP65 IP65 IP65 IP65 M M M M M M Image Sensor Color Color Color B/W Color B/W Image size VGA VGA Mega Mega Mega Mega Mono (M) / Dual (D) Resolution horizontal x vertical Max. frame rate CIF/VGA/Mega 640x480 640x480 1280x960 1280x960 1280x960 1280x960 16/16/- 30/30/- 1 1 1 0.1 1 0.1 Sensitivity at 1 second (Lux) 0.05 0.05 0.05 0.005 0.05 0.
53/56 Secure Models M22M IT Models D10 Web Models M10 Basic Models M22M Camera Manual Part 1 Software Features (All Models) Digital zoom (2x, 4x) with panning Motion JPEG/MxPEG video streaming X X/X X/X X/X X/X Custom exposure windows X X X X Video Motion Detector X X X X Time and event control (FTP, email, logos) X X X X Time tables with holidays X X X X Web functionality (FTP, email) X X X X Quad/MultiView in browser X X X X Recording/Playback in browser X X X
54/56 M22M Camera Manual Part 1 IP65 Certificate © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
M22M Camera Manual Part 1 FCC Declaration of Conformity © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
56/56 M22M Camera Manual Part 1 Declaration of Conformity © MOBOTIX AG • Security-Vision-Systems • Made in Germany www.mobotix.com • sales@mobotix.com • 31.1.
M22M Camera Manual Part 1 MOBOTIX ... the new face of IP video All pictures in this manual are genuine MOBOTIX camera images. Enjoy the image quality! Manufacturer: CEO: MOBOTIX AG Luxemburger Str. 6 67657 Kaiserslautern Dr. Ralf Hinkel Germany Court of Registration: Amtsgericht Kaiserslautern Registration Number: HRB 3724 Tel.: +49 (631) 3033-100 Fax: +49 (631) 3033-190 Tax Code: 19/650/0812/1 Tax Office: Kaiserslautern http://www.mobotix.com sales@mobotix.
3 mm Beschnitt umlaufend Megapixel 1280 x 960 software zoom VGA (640 x 480) 10 fps Mega -22°F to +140°F Weatherproof -30°C to +60°C, IP65 no heating necessary M22M X Camera Manual Part 1 IEEE 802.
