Specifications

82/148
M15 Camera Manual: Installation
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.5 Mounting the Camera with Pole Mount (Accessories)
If you are intending to install the camera on a pole, you should consider using the MOBOTIX
M15 pole mount. This mount is made of 3-mm powder-coated stainless steel (white) and
has been designed specifically for outdoor use. The supplied stainless steel straps allow
the mount to be attached to poles with diameters between 60mm and 180mm. By design,
the pole mount does not allow the use of an in-wall socket. We recommend using an
MX-Patch-Box that can be easily inserted into the cavity socket of the wall mount (VarioFlex
mount) in order to ensure a weatherproof connection of the network devices. For more
information on the MX-Patch-Box, please visit www.mobotix.com and go to the Products>
Accessories> Interface Boxes section.
The camera is always installed together with the VarioFlex
mount, which is shipped as a wall mount, and can also
be installed directly on the pole mount. The best cam
-
era position for the selected sensor module must be
found before installing the camera (see Section 2.2, «First
Installation Steps» ). You can fine-tune its position once
the camera has been installed on the wall.