User manual

2.9 The MOBOTIX SecureFlex Mount
The SecureFlex mount (item1) enables easy mounting of the MOBOTIX M12
models to a wall or a ceiling. Its innovative and flexible design allows positioning
the camera into virtually any direction. On top, the SecureFlex wall mount covers
RJ45 wall outlets (without the frame) and the concealed cabling improves the se-
curity of the camera. The SecureFlex mount is pre-installed on all MOBOTIX M12
models.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
35/92
M12 Camera Manual Part 1
MOBOTIX Network
Power Adapter or Net-
work Power Box/Rack or
PoE-compatible switch/
router should be used
Note
Since the external power supply cannot be connected to the ISDN con-
nector of the camera, it is recommended to use a Network
Power Adapter, a Network Power Rack or a standard
PoE switch or router to inject power into the Ethernet
cabling. As an alternative, a suitable extension cable may
also work.
Wall mount
Bottom cover
Cover
Turn/tilt unit
Drain holes for exit of condensation
water (never seal off!)
Caution
The SecureFlex mount must not be installed upside-down, as the
camera will not be dustproof and resistant against water jets
(IP65) any more! The holes in the bottom cover always have to
point downwards.
Camera holder