User manual

SecureFlex pole mount (MX-MH-SecureFlex-ESWS)
If you are intending to mount the camera on a pole,
you should consider using the SecureFlex pole
mount, which is made of 3mm stainless steel
(white, powder coated) and which has been de-
signed specifically for outdoor usage. The supplied
stainless steel straps allow attaching the mount to
poles with diameters between 60 and 180mm (2.4"
to 7.1").
MOBOTIX Cam-IO (MX-CAM-IO)
This installation module for MOBOTIX cameras
features numerous connectors for external devices.
It thus expands the scope of camera applications
when adding external sensors using its two signal
inputs. On the other hand, it also allows controlling
other devices (two signal outputs, Line In/Out for
audio signals) and serves as power supply of the
camera.
For additional information on the MOBOTIX Cam-IO,
see section 3.7.2,
MOBOTIX Cam-IO : Expansion Mo-
dule for Easy Installation
.
Split cable for ISDN-only power supply
If only ISDN is available for the camera and only one cable should be used for con-
necting the camera, you will need to inject power into the 8-wire cable using either
a power supply and the Network Power Adapter or an MX-NPR-4/8/20.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
27/92
M12 Camera Manual Part 1
SecureFlex Pole Mount:
Outdoor quality made of
3mm stainless steel
Expansion box with
various possibilities for
attaching external devices
and sensors
Power injection into one
cable when using only
ISDN