User manual

2.3 Optional Accessories
Power supply (MX-SNT-E/U/GB/J/AUS01-30-RJ)
The MOBOTIX power supply is required if you do not
use a Network Power Box or Network Power Rack
(see below), or a PoE-compatible switch or router.
Network Power Adapter (MX-NPA-3-RJ)
The Network Power Adapter allows injecting the power supply for the MOBOTIX
camera into the network cable. It thus allows using a single cable for connecting to
the camera and for remotely supplying power (up to
100m/300ft). The Network Power Adapter is requi-
red, if you are using the universal power supply and
the SecureFlex mount, and power is not supplied
using a PoE switch/router or a MOBOTIX Network
Power Box/Rack.
Network Power Box for up to 4 Cameras (MX-NPR-4)
The MX-NPR-4 allows supplying power to up to four
MOBOTIX cameras via the network cable. The
NPR-4 thus replaces four separate power supplies
and four Network Power Adapters. The Network
Power Box delivery includes a (detachable) clip at
the back, which simply clicks onto DIN rails.
Network Power Rack for 8/20 Cameras (MX-NPR-8/20)
The MX-NPR-8/MX-NPR-20 allow supplying power
to up to 8/20 MOBOTIX cameras, respectively, via
the network cable. These NPRs thus replace 8/20
separate power supplies and the same number of
Network Power Adapters; they are easily mounted
in 19" racks (2 rack units).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
26/92
M12 Camera Manual Part 1
Not required if network
components are used that
support the PoE (Power
over Ethernet) standard
IEEE 802.3af!
Power supply for smaller
systems
Intelligent and robust po-
wer supply thanks to DIN
rail installation
Zero maintenance and
reliable as these devices
do not require fans
Advantages of the MOBOTIX PoE Products
Zero maintenance and reliable as the systems do not require
fans.
Higher reliability of the system as a whole, since standard swit-
ches without PoE can be used (lower risk of failure).
Easy installation on DIN rails (
MX-NPR-4
) or in 19" racks
(
MX-NPR-8/20
).