Technical data

www.mobotix.com
52
Options
Weatherproof Interface Boxes
Protection-Box
This network protection box allows you to protect your MOBOTIX camera
from damage caused by electrical surges of up to 4,000 volts that are
triggered, for example, by voltage fluctuations, high-voltage loads and
lightning strikes nearby. Used to establish an Ethernet connection using
a MOBOTIX patch cable (RJ45) or via a single-wire terminal connector
with an ETH installation cable.
MX-Overvoltage-Protection-Box-RJ45
MX-Overvoltage-Protection-Box-LSA
€48 each
NPA-Box, PoE-Injector
The Network Power Adapter (NPA) box is used to connect a camera to
the network and supply power from external power supplies or batteries
from 12 to 57V DC. Ideal for battery-powered mobile surveillance units.
MX-OPT-NPA1-EXT
€128
GPS-Box
GPS timer for MOBOTIX systems. Includes temperature and illumination
sensors for outdoor use and an NTP time server for system synchronization.
Tracking functions and alarms can be configured in the camera software
based on position, speed, illumination and temperature. The box is
connected via MxBus to a MOBOTIX camera.
MX-OPT-GPS1-EXT
€178
Proximity-Box
Connected to a MOBOTIX camera via MxBus wires, this interface box
enables motion detection with direction and distance detection up to
max. 10 m (32 ft.) based on radar microwaves. It can be mounted behind
walls (e.g. wooden, plastic, dry walls) and is a MOBOTIX alternative to PIR.
MX-OPT-PROX1-EXT
€128
MX-NPA-Box
MX-GPS-Box
MX-Proximity-Box
MX-Protection-Box
Secure Installation Of Interface Boxes
All interface boxes are weatherproof (IP65, -30°C to +60°C/-22°F to +140°F) and
feature a highly compact design (width: 8 cm). They can be mounted securely out
of reach in the M15D and M25M VarioFlex wall mounts or in the D15D and Q25M/
D25M wall mounts (see figure).
NEW