User manual

100/148
D24M User Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
3.1.2 Automatically Using MxControlCenter Or MxEasy
You can set up the camera's network parameters using the free of charge video manage-
ment software MxControlCenter or MxEasy (see Sections 3.2.3 and 3.2.4). You can also
use one of these applications to automatically configure the network parameters of MOBOTIX
cameras that are not operating on the same IP address range as the computer.
Advantages
• You can connect the camera directly to the target network.
•
The camera does not need to be physically accessible, i.e. it can remain mounted
to a pole, for example.
• The camera can be configured to automatically receive an IP address (optional).
• The network parameters can be manually set (optional).
• You do not need to access the camera user interface.
Requirement
•
The MxControlCenter or MxEasy video management software needs to be installed
on the computer.
MxControlCenter soft-
ware (free download
from www.mobotix.com)
MxEasy (free download
from www.mobotix.com)