User manual

2.7 Mounting the D22M to a Ceiling Using the In-Ceiling Set
Before mounting the MOBOTIX D22M-IT/Secure to an indoor location using the In-
Ceiling Set, you need to prepare the network connection and drill the hole for the
camera:
• Network connection: The network cabling is supplied through the ceiling
directly above the camera.
When preparing the installation, you should make sure that you have at least
15cm (6in) of unused cable.
• Hole for the camera: Prepare the hole for the camera. The hole should have
a diameter of 150mm (6in)!
Procedure
• Insert the camera into the In-Ceiling
mount without the outer shell and the
mounting ring. The tapered guides on the
back of the D22M housing fit exactly into the
openings of the In-Ceiling mount.
• Connect the network cable to the network
cable of the camera using a patch cable
connector.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
62/108
D22M Camera Manual Part 1
Find the drilling template
at the end of the manual