User manual

MxControlCenter changes the network configuration of the current camera and,
after a short time, the camera also appears in the list with a new IP address and in
the same subnet as your computer.
Make sure that the Save camera configuration permanently checkbox is acti-
vated so that the new network settings will be used from now on and not just until
the camera's next reboot
.
Defining Additional Video Sources
Besides automatically detecting MOBOTIX cameras, you can also manually add
other video sources to the list of available video sources in MxControlCenter.
Automatic search: Scans the (physical) network.
This scan will find all MOBOTIX cameras, regard-
less of whether they are in the same subnet as the
computer or in a different one.
Add camera manually: Enter a known IP address
or the DNS name of a MOBOTIX camera if this
camera had not been detected during the auto-
matic search in the first place.
Add MxPEG clip: Adds an MxPEG video clip previously recorded by a
MOBOTIX camera as a video source.
Add file server path: Adds the alarm images previously stored by a
MOBOTIX camera on an external file server as a video source.
Selecting Video Sources
Highlight the desired video sources you would like to manage and display in
MxControlCenter.
Camera Preview
If you select a camera with a status of
OK
,
MxControlCenter automatically displays the
live images from the camera in the preview
window. If you are using [Ctrl]-click to select sev-
eral cameras, the image from the camera
selected last is shown in the preview window.
This feature facilitates identifying the cameras
you would like to use.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
98/104
D22M Camera Manual Part 1
Note
If you have set a different user name and password for administration
than the factory-preset ones (admin, meinsm), you will need to have
these user credentials available and enter them in the appropriate dia-
log. To open the dialog, click on the
Enter password
context menu
entry.