Technical data

59/132
First Installation Steps
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.3.3 Connecting Ethernet Cable With The MX-Patch-Box
The MX-Patch-Box enables you to connect a MOBOTIX
camera with a patch cable or with an Ethernet installation
cable simply and water-resistant for the following cases:
•
Outdoor installation (preferably using the Outdoor Wall
Mount)
• Indoor installation with Ethernet installation cable
You will find additional information on the MX-Patch-
Box at www.mobotix.com under the section Products >
Accessories > Functional Boxes.
2.3.4 Connecting The Mini USB Cable
Existing additional modules like the MOBOTIX ExtIO (USB) can be connected via the Mini
USB connector.
1.
Remove the outer shell: Remove the outer shell using
the supplied custom tool. Insert the tip of the custom
tool into the three small holes of the shell, one by
one. Lift the outer shell to loosen it from the fixtures.
2. Remove cable cover: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
3. Remove cable cover: Remove the two M4x25 Allen
screws from the cable cover using the 3-mm Allen
wrench.
4. Remove rubber plug: Carefully bend the cable guide
upwards and remove the rubber plug. Keep the rubber
plug in a safe place (ideally in the camera’s original
packaging).
Use the supplied
custom tool