User guide

66
NTC-40 –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
NTC-40 Series – HSPA+ M2M WiFi Router
Technical Data
The following table lists the hardware specifications of the NTC-40.
MODEL
NETCOMM NTC-40
CPU
Atmel AT91SAM9G45 Microcontroller (ARM9)
Modem Module/Chipset
Sierra MC8704 / Qualcomm MDM8200A
Wireless LAN Chipset
IEEE 802.11b/g/n, up to 16 concurrent users
Memory
RAM: 64MB DRAM
Storage: 256MB Flash
Operating System
Embedded Linux 2.6
UMTS bands
Quad-Band: 850/900/1900/2100Mhz
GSM bands
Quad-Band: 850/900/1800/1900Mhz
Maximum Data Throughput /
3G Radio interface
Downlink: 21 Mbps (HSPA Evolution); EDGE/GPRS 247Kbps); Uplink: Uplink: 5.76 Mbps (HSPA
Evolution); EDGE/GPRS 247Kbps
Wireless Frequency
2.4 ~ 2.438Ghz
Peak Data Rate (Wireless)
300 Mbps (MIMO)
Wireless Security
WEP 64-bit, WEP 128-bit, WPA, WPA-PSK, WPA2-PSK, Mixed WPA-PSK/WPA2-PSK, TKIP, AES
Connectivity
1x Fast Ethernet 10/100Base-TX w/ Auto MDIX
1x Mini USB 2.0 Console Port
1x Voice port (RJ-11)
SIM Card Reader
1 x Lockable SIM Card Tray Reader, Push to Release
Antenna connectors
Cellular: 2 x detachable SMA (MIMO)
WLAN: 2 x detachable Reverse SMA (MIMO)
LED Indicators
One power supply indicator
One Cellular network type detected Indicator
One Tx/Rx Data Transmit Indicator
One Carrier Detect indicator
One Received Signal Strength indiator
Operating Temperature
Platform: -20˚C to +85˚C
Module: -20˚C to +60˚C (Normal Operating Temperature)
Power input
DC-in Port: 8 ~ 28V
AC/DC Power Adapter: 100-240V AC to 12V DC/1.5A
Power Consumption
Standby Input Current: 110mA @ 12V DC
3G Active Current: 300mA @ 12V DC
Maximum Input Current: 560mA @ 12V DC
Table 36 - Technical Specifications for the NTC-40