User guide

YML40V
www.netcomm-commercial.com.au
NTC-40 –HSPA+ M2M WiFi Router with Voice
65
NTC-40 Series – HSPA+ M2M WiFi Router
System Configuration
The System configuration page is used to specify an external syslog server and the TCP Keepalive settings.
TCP Keepalive can be used to ensure the WWAN connection does not disconnect due to inactivity.
Figure 64 - System Configuration Items
OPTION
DEFINITION
IP / Hostname [:PORT]
The IP address and port of the external syslog server you would like logging information sent to.
Keepalive
Enable or Disable the TCP Keepalive function.
Keepalive Time
The interval between the last packet sent and the first TCP keepalive packet being sent.
Keepalive Interval
The time between subsequent TCP Keepalive packets.
Keepalive Probes
The number of TCP Keepalive packets to send.
Table 35 - System Configuration Items
Logoff
The logoff item will log you out of your web configuration session.
Figure 65 - Logoff
Reboot
The reboot item will reboot the router. This can be useful if you have made configuration changes you want to implement or want to
reboot the router.
Figure 66 - Reboot Router