User guide

YML40V
www.netcomm-commercial.com.au
NTC-40 –HSPA+ M2M WiFi Router with Voice
57
NTC-40 Series – HSPA+ M2M WiFi Router
NS Update
NS Update is used to update an internal DNS resource. This can be used to enable a fully qualified domain name (FQDN) to be
used to access the router.
Figure 50 - NS Update Settings
OPTION
DEFINITION
NSUPDATE Configuration
Enable or disable the NS Update function.
Server Address
The address of the NS server to update the DNS entry for the router on.
Secondary Server Address
The address of the secondary NS server to update the DNS entry for the router on.
DNS Zone
The DNS zone the routers DNS entry is contained within.
Host Name
The hostname of the router to put in the DNS entry.
Expiry Time (in minutes)
The number of minutes the DNS entry will remain valid before an update is performed. You can also select to only perform an
update when the WWAN connection becomes available.
Table 31 - NS Update Configuration Items
Auto Dial
Auto Dial is used to automatically dial the configured number as soon as the telephone handset is picked up. You can specify any
telephone number you wish.
Figure 51 - Auto Dial Settings
ITEM
DEFINITION
Enable Auto Dialling
Enable or disable the auto dialling function of the router.
Auto Dialling Number
Enter the number to be automatically dialled when the attached handset is picked up.
Table 32 - Auto Dial Configuration Items
After entering the required auto dial telephone number, click the “Save” button.