User guide

YML40V
www.netcomm-commercial.com.au
NTC-40 –HSPA+ M2M WiFi Router with Voice
27
NTC-40 Series – HSPA+ M2M WiFi Router
Routing
Static
The Static Route page is used to add or delete static routes. Static routes can be used to facilitate communication between devices
on different networks.
Figure 24 - Static Route Settings
Some routes are added by default by the router on initialisation such as the Ethernet subnet route for routing to a device on the
Ethernet subnet. A PPP route is also added upon obtaining a WAN PPP connection.
Adding Static Routes
 Enter the required values in the fields (as shown above) for route being added.
 Click the “ADD” button.
Please note: You must increment the “Route no” by 1 for each route in the “Route no” field otherwise that route will be
overwritten.
The Active Routing table at the bottom will then show the new route added.
Deleting Static Routes
Click the “Delete Entry” text (in blue).