User guide

26
NTC-40 –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
NTC-40 Series – HSPA+ M2M WiFi Router
DHCP Relay Configuration
To relay the DHCP function from a remote DHCP server select the “DHCP Relay Configuration” link at the top of the page.
Figure 23: Internet Settings - LAN - DHCP - DHCP Relay Configuration
1. Set the “DHCP Relay” option to Enable.
2. Enter the IP Address of the DHCP Server you wish to relay to.