User guide

YML40V
www.netcomm-commercial.com.au
NTC-40 –HSPA+ M2M WiFi Router with Voice
25
NTC-40 Series – HSPA+ M2M WiFi Router
DHCP
The DHCP page is used to adjust the DHCP settings used by the router. The DHCP settings are then passed onto any device
connecting via DHCP.
You can manually set the DHCP Start and End range, the DHCP Lease time, the default Domain name suffix, Primary and
Secondary DNS Server, the Primary and Secondary WINS Server, as well as the NTP, TFTP and Option 150/Option 160 (VoIP
options) settings.
Figure 21 - DHCP Settings
After entering the applicable details, click “Save”.
You can also assign a particular IP address to a specific device every time that device makes a DHCP request as follows:
Figure 22 - DHCP Settings - Fixed Mapping
1. Click the “Add” button.
2. Enter a name for the computer or device.
3. Enter the computer or device’s MAC address.
4. Enter the IP address to assign to the device.
5. Click the “Save” button.