User guide

22
NTC-40 –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
NTC-40 Series – HSPA+ M2M WiFi Router
SIM Security
The SIM Security page can be used for authenticating SIM cards that have been configured with a security PIN code. The security
PIN code protection can also be enabled or disabled on this page.
Figure 16 - Internet Settings - Mobile Broadband - SIM Security
If the SIM card is locked you will need to unlock it with a PIN provided with your SIM card. You can find out if the SIM is locked by
viewing the SIM Status on the Status page:
Figure 17 - SIM Security - Status Page Warning
If the SIM Status is “SIM PIN” as above then do the following:
a) Click on the “Internet Settings” menu at the top of the page and then the “SIM Security” item from the WWAN (3G)
menu item on the right.
Figure 18 - SIM Security - SIM PIN Needed
b) Enter the PIN code in the “PIN” field and then enter it again in the “Confirm PIN” field to confirm the PIN code.
Please note: You can also select to “Remember PIN” so that entering the PIN code each time the SIM is inserted is not
required. Alternatively you can also disable SIM PIN protection by selecting to “Disable PIN” from the “PIN
Protection” drop down menu.
c) Click Save.
Enter PUK
After three incorrect attempts at entering the PIN code, you are requested to enter a PUK code.
Please note: You will need to contact your 3G provider to obtain this number.
Your carrier will issue you a PUK code to enable you to unlock the SIM and enter a new PIN code. Enter the new PIN and PUK
codes and click Save.