User guide

10
NTC-40 –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcommwireless .com
NTC-40 Series – HSPA+ M2M WiFi Router
NTC-40 Default Settings
The following tables list the default settings for the NTC-40 Series.
LAN (MANAGEMENT)
Static IP Address:
192.168.1.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.1.1
Table 6 - LAN Management Default Settings
WIRELESS (WIFI)
SSID:
NetComm Wireless XXXX where
XXXX are a set of 4 random digits.
Security:
WPA2-PSK
Security Key:
Check your Wireless Security Card or
the device label on the bottom of the
NTC-40 for your default SSID and
Security key.
Table 7 – WiFi Default Settings
For security purposes, it is recommended to change the Default SSID and Wireless Security Key.
NTC-40 WEB INTERFACE ACCESS
Username:
admin /root
Password:
admin
Table 8 - Web Interface Default Settings
NTC-40 TELNET ACCESS
Username:
root
Password:
bovine
Table 9 - Telnet Access
Logging into the router with the username of root gives extended System options such as the ability to
reboot the router, upgrade the firmware and install extra packages.