User guide
| Wireless M2M
9
NTC-40 Series - M2M WiFi Router
Step 6: Connect to the Internet
Your router should automatically connect to the Internet if the SIM status
reads “SIM OK”. If it does not, follow the steps listed below to setup the
Mobile Broadband connection.
By default, the router is set to automatically congure the mobile
broadband connection. It tries to detect the correct APN and connection
details in order to connect to your Mobile Broadband service.
If the auto-conguration is unsuccessful, you will need to enter the
connection details as follows:
From the menu, select Internet Settings -> Mobile Broadband ->
Connection.
Unselect the “Automatically congure my mobile broadband” box
and click “Save”.