User guide

| Wireless M2M
5
NTC-40 Series - M2M WiFi Router
Conguring your Router
You will need an active SIM card to congure your router.
Step 1: Insert the SIM card
Press the SIM Eject button to eject SIM card bay. Make sure the SIM
card is inserted correctly by inserting the SIM the gold side facing down
in the direction as shown below:
Insert
SIM
Card
Press the
SIM Eject
Button
Step 2: Set up the Router
Connect the supplied antennas to the Router by screwing them onto
the antenna connectors. Connect the power adapter to the mains and
plug the output into the power terminal of the router.The red Power
LED on the panel should illuminate.
+VE -VE
Polarity of
Power Terminal
Polarity for 2 way captive
power Terminal Block
+
-