User guide
6 NTC-40 Series Quick Start Guide
Overview of Cellular Router Interfaces
Field Description
Main Antenna Socket SMA Female
Receive Diversity Antenna
Socket
SMA Female
Main WiFi Antenna Socket SMA Female
Receive Diversity Antenna
Socket
SMA female
5 Indicator LEDs Indicate visually the activities and connection state for power,
service type, data trafc, data carrier connection and network
signal strength.
2-Way Captive Power Power terminal block and the wide voltage range of 8-28V DC
Terminal Block simplify the installation in different industrial environments
Reset Button Resetting the router to factory default values
Ethernet Port For direct connection to your device or number of devices
through a hub or network router.
Voice (RJ-45) Port To connect a telephone directly to your router
SIM Card Reader For insertion and removal of SIM Card
Conguring your Router
You will need the following hardware components to set up the Cellular
Router:
Power Supply (8-28VDC)
Ethernet cable
Laptop or PC
Active SIM card
The router is primarily managed via web interface.
Before you power up the Cellular Router, please insert an active SIM card.