User guide
NTC-40 Series Quick Start Guide 15
NetComm Wireless M2M Series - NTC-40 Series
To Connect Using a Connection Prole
The Router proles allow you to congure the settings that the router will use
to connect to a particular network.
By default, the Router is congured to use the AutoCong prole. This prole
should detect the correct APN and connection details in order to connect to
your 3G service.
If it does not, you will need to enter the connection details manually. To do
this, perform the following steps:
In the AutoCong prole, select to disable “Auto Connect” and click
“Save”.
Select one of the other proles and congure it with the details
provided by your 3G service provider.
Select to enable “Auto Connect” for this prole and click “Save”.