Technical data

MobilSat
+
Mounting instructions
Page 9 of 12
6.10. Connection to the satellite receiver
Now it’s possible to connect the antenna system to the satellite receiver, using the F-connector
cable.
6.11. Installation menu
All the functions of the system are activated using the control panel, showed in the following
picture.
To activate operator menu press simultaneously the UP/DOWN keys for at least 3 seconds.
The system is password protected. To input password press UP/DOWN keys to modify the
selected digit and LEFT/RIGHT keys to change the selected digit. The default password is 3105.
After having inserted the right password it’s possible to activate all the installation functions.
In the following pages are showed all the functions and menus needed for installation.