User Guide

GAT
P A G E | 3 O F 9
5500 TRABUCCO ROAD SUITE 150, IRVINE, CALIFORNIA 92620
P: [phone]
E:
[e-mail]
© MOBILOGIX, INC.
2 INTRODUCTION
The GAT is a multi-purpose LTE CAT-M1 / NB1 and 2G (GSM/GPRS/EDGE), IP67 rated mobile asset tracking and monitoring
device with various onboard sensors including temperature, pressure, humidity, light, a 3-axis IMU/Gyroscope, and GNSS/GPS. It
also boasts WIFI LAAS and BLE (Bluetooth Low-Energy) connectivity. It is designed for applications such as critical asset tracking and
cold-chain, with the ability to periodically report sensor data and location data per configurable intervals, and report near-real-time
events or alarms, based on configurable intervals and configurable thresholds.
3 QUICK START
3.1 INTERFACES
3.1.1 BATTERY CHARGER USB PORT
The Battery Charger USB Port allows
connection of USB power for charging the
unit’s internal battery.
3.1.2 BUTTON AND RADIO POWER
CONTROL
Pressing the button for 2 seconds toggles
radio power. Allow several seconds after
button is recognized for the radio to
complete its power cycle.
Pressing the button for 10 seconds
performs a system reset, after which the
radio powers on and performs sensor
reporting as necessary.