Operator's Guide

Overview!
This guide will take you step-by-step through configuration and
confirmation.
STEP 1
Insert your Controller into a bicycle and connect it to your SocialBicycles
Lock.
STEP 2
Secure your Controller to the bike frame using the 2 security screws and a
torque wrench.
STEP 3
Connect the battery to power on your QR Controller and attach the rear lens
cover to secure the battery.
STEP 4
Verify that your Controller is working by using it to rent and unlock the
Social Bicycle which you installed it on during Step 1.
Help with Activating your Controller!
For Help with Activating your Controller:
Contact the MobilityCloud service center team by email at
[e-mail]."
"
Help after Activating your Controller!
For Help after Activating your Controller:
Contact the MobilityCloud service center team by email at
[e-mail].