Operator's Guide

Getting to Know your Device
!
DEVICE INTERFACE
Indicator LEDs: The five (5) indicator LEDs show the current status of the
bike. These let the operator quickly know whether a bike is working, rented
or in repair.
Keypad: The Controller’s keypad includes twi (2) keys, one to wake up
the device, and another one to mark bicycle as broken.
DEVICE CONNECTORS
Female Lock Connector: A QR Controller requires a SoBi Lock and Social
Bicycle to be useful for a bike share operator. Plug the Lock’s cable into this
connector. See the SoBi Lock Operator Guide for details.
Programming Connector: The QR Controller can be reprogrammed over the
air (OTA) or by connecting the device. Reprogramming is only to be done at
direction of MobilityCloud service center sta!.
REMOVABLE PARTS
Battery: Each QE Controller ships with one 4.2V Lithium Ion Battery Pack
(part No. SC2-BAT-15A64V2). This battery is connected.
Rear Lens: Each QR Controller ships with a rear lens cover secured by 2
security screws. The lens cover provide operators with secure ac- cess to
the Controller’s battery compartment. When needed, remove this cover to
swap batteries.
Security Screws: Each QR Controller comes with two (2) custom security
screws and two (2) T-10 security screws. Use these to secure the Controller
to the bike.
!