User guide

powering up and down
Your model 02 ships with a screen protector and battery
attached.
To turn on your model 02, press the power button located on
the left side of the computer. When idle, conserve battery
power by putting your computer in Sleep or Hibernate mode.
To charge the battery, connect the power supply to the model
02 as shown at right, and then plug into an outlet. The battery
will charge whenever the computer is connected to an outlet.
Sleep mode
Sleep mode reduces the power consumption of your computer
by cutting power to non-critical hardware components. The
system maintains power to your computer’s random access
memory (RAM), which allows the system to quickly restore
your active applications and files. It will also save your session
to the hard drive, so you can access it even if the memory
loses power.
To put your computer into Sleep mode, press the power button.
hibernate mode
Hibernate mode saves your current system state to the
hard disk drive and then powers down your computer. When
you power up again, your open files and applications are re-
stored just as you left them. Hibernate mode draws no power
and is best for conserving battery life and changing batteries.
To put your computer into Hibernate mode, click on the Start
menu and choose the ‘Hibernate’ option in the right arrow tab
menu.
conserving battery power
Additional ways to conserve battery power include:
Turn off wireless radios when not in use.
Turn off the keyboard backlight.
Lower the internal display brightness.
Adjust power settings in the Power Options control panel.
•
•
•
•
6